Congratulations on your new RollerMouse. Take a moment to read the tips on how to get started and you will be on your way in just a few moments.

Basic functions

Use the rollerbar to move the cursor on your screen. You can also click with it. Use the large left button to left click and the large right button to right click. Use the scroll wheel in the middle to scroll and click.

1. Plug your RollerMouse into your computer’s USB port

Allow your computer a moment to automatically install it. Your computer may indicate that it has found a new device and is installing it. This process usually takes 10 to 30 seconds.

2. Aim for the right alignment of your keyboard

Place the keyboard behind your RollerMouse. The keyboard’s front edge should be parallel to the rollerbar. Center the scroll wheel between the home keys. (On most keyboards, this will be between the “G” and the “H”).

3. Adjust the keyboard height and angle

Take a moment to evaluate the height and angle of your keyboard and find the arrangement that’s most comfortable for you. The flatter your wrist, the better for your body. If you find the keyboard is too low, simply add height to your keyboard by inserting the keyboard risers.

4. Ready to go

With these few steps you are ready to go. We hope you will enjoy working with your new RollerMouse.

When you have worked with your RollerMouse for a little while, you might wish to adjust the speed and precision of the cursor and the click response of the rollerbar. How to do this depends on which RollerMouse you have. Download the user manual of your product below.