|
Downloadable
Driver Software
By clicking the "Download
the driver now" option at the bottom of the page, you
will download a file named r5p303.zip, which is the
driver for the RollerMouse when plugged into the PS2
port. Please review the installation instructions PRIOR
to installation.
For
more detailed information about the driver features, download
the User's Guide.
Installation
Instructions
1.
BEFORE YOU BEGIN
To update an existing RollerMouse driver set, follow the
instructions for a first time install. Removing the existing
driver is not necessary.
Other mouse software
may interfere with installation or use of the RollerMouse
driver; please remove them before installing
the RollerMouse driver:
- From the Start menu, select
Settings, Control Panel, then Add/Remove Programs.
- Select any mouse software
that appears on the list.
- Click Add/Remove to remove
the mouse software.
- Restart Windows and confirm
that only the standard Mouse Properties pages are present
(Buttons, Pointers, Motion and Hardware). If other pages
remain, check your existing mouse documentation for removal
instructions.
2.
DRIVER INSTALLATION
Shut down your system and
connect the RollerMouse to the round PS/2 mouse port before
installing the driver.
Installing the driver set
requires system-adminstrator security privileges on Windows
2000 and XP. When you are ready to proceed:
- Create the directory "contour"
on the drive you can access (usually c:\ or d:\ drive)
- Download the file r5p303.zip.
- Save it on the directory
just created.
- Unzip the file r5p303.zip
in the same directory.
- Run Setup.
- Follow the prompts to install
the driver. After Setup finishes, it will restart Windows
with the new driver.
Notes:
- For Windows 2000 and
XP users: the RollerMouse driver is not digitally-signed
by Microsoft. A warning message may appear during the
installation. Click OK to proceed with the installation.
- To check the RollerMouse
driver version, right click the tray icon and select
About Mouse.
|
